Restaurant tables

Beech wood structure and 180x100 cm HDF top.

Aro Coffe table in beech wood structure, 48cm Diam. with tops in Wood, Crystal, Compact, HDF and upholstered.

Table height: about 740 mm.
Table size: optional.

Table top:  23 mm chipboard with 23 mm, 36 mm or 55 mm solid edge. Or beech, oak or maple solid wood panel.
Solid wood parts: Water-based paint

Table height: approximately 74.5 cm
Table size: optional
Description
Bases with either wood or metal column and steel base. Metal parts powder coated as standard in a RALT-ton as desired. Alternatively, also available in stainless steel. tabletop HPL-coated chipboard with solid wood edge and return, or from solid beech, oak or maple. Tabletop size selectable. Wood tone according to standard collection or as desired possible. Base standard with leveling screws.
Nature
Table top: Schichtsoffbeschichtete 23 mm chipboard with 23 mm, 36 mm or 55 mm solid edge. Or beech, oak or maple solid wood panel
Solid wood parts: Water-based paint

4 square studs made of beech solid wood with 4 decorative grooves, tapers down. Table frame is connected by corner blocks and hanger bolts with studs. Disk: support plate 22 mm chipboard E 1 Top HPL 0.8 mm. Paving Formica according to house collection. Bottom return melamine resin 0.2 mm, 36 mm Buchenmassivholzanleimer, 13 mm thick.
Nature
Table top: Support plate 22 mm chipboard E 1 Top HPL 0.8 mm. Paving Egger according to house collection. Bottom return melamine resin 0.2 mm with 23 mm, 36 mm or 55 mm Buchenmassivholzanleimer, 13 mm thick or beech, oak or maple solid wood panel.
Solid wood parts: Water-based paint

Table height: about 74 cm
Table size: optional
Description
Runners cheeks table. The two central bars made of beech solid wood can be interlocked for reinforcement with the massive cheeks. The cheeks are glued together by means of cross pieces to the table top and screwed, the runners are dovetailed with the cheeks and glued. The table frame is shot with wave clips on the tabletop.
Nature
Table top: Support plate 22 mm chipboard E 1 Top HPL 0.8 mm. Paving Egger according to house collection. Bottom return melamine resin 0.2 mm with 23 mm, 36 mm or 55 mm Buchenmassivholzanleimer, 13 mm thick or beech, oak or maple solid wood panel.
Solid wood parts: Water-based paint

Table height: about 74 cm
Table size: optional
Description
Racks beech veneered. tabletop HPL-coated chip leaf with solid wood edge and return, or from solid beech, oak or maple. Tischplattengre free Can Be Selected. Wood tone according to standard collection or as desired possible. By default, with hard frame. Runners with leveling screws.
Nature
Table top: Support plate 22 mm chipboard E 1 Top HPL 0.8 mm. Paving Formica according to house collection. Bottom return melamine resin 0.2 mm, 23 mm ABS edge strip, 36 mm solid beech edge or solid wood panel (beech, oak, maple)
Solid wood parts: Water-based paint

Table height: about 74 cm
Table size: optional
Description
Table with cross frame consisting of 2, 3-pegged in shock and crosswise glued runners. The four upright cheek pieces are glued with big long pin with both the cross runners as well as with the cross-shaped dovetailed cross timbers. Due to the current, twice the arrangement of upright Stcke a good angle and torsional stability is achieved. The table top is bolted to the cross beams.
Nature
Table top: Support plate 22 mm chipboard E 1 Top HPL 0.8 mm. Paving Egger according to house collection. Bottom return melamine resin 0.2 mm with 23 mm, 36 mm or 55 mm Buchenmassivholzanleimer, 13 mm thick or beech, oak or maple solid wood panel.
Solid wood parts: Water-based paint

Table height: approximately 745 mm
Table size: optional

Table top: Support plate 22 mm chipboard E 1 Top HPL 0.8 mm. Paving Formica according to house collection. Bottom return melamine resin 0.2 mm, 23 mm ABS edge strip, 36 mm solid beech edge or solid wood panel (beech, oak, maple)

Solid wood parts: Water-based paint